What is a regulator and which one do I need?

A regulator regulates gas flow from your gas tank into your gas product.

There are two questions you need to answer in order to determine what regulator you need:

  1. What mBar pressure is most common in my region?
  2. What fitting is most common on gas bottles in my region?

Different regions use different gas bottles. These different gas bottles will have different connections. The regulators which we provide with all Ooni gas products are region specific. 

  • When ordering one of our gas products, make sure you select the model that is compatible for the region which you wish to use your product.

US, CA, NZ, AU, ZA: 

28mBar

✅Supplied and fully assembled with the Ooni product

Hose Outlet: 5/8” UNF - 18 Hose nozzle threaded terminal (supplied fully assembled)

Hose length: 0.92m Hose                                          

Bottle Regulator: 2.8kpa (11Winch) Propane Regulator

Regulator inlet: QCC(HW-01) Left handed female thread 


CY, DK, EE, FI, HU, IT, LT, NL, NO, SE, SI, SK, RO, HR, TR, BG, IS:

30mBar

Please note that 30mBar Ooni gas products are not shipped with a regulator. The range of 30mBar regulators is vast and so we thought it would be best to allow you to chose the regulator which is suitable for use with gas tanks available to you.

To you a regulator might be known as a regolatur tal-gass (MLT). 

Terminal outlet: 1/4” Left handed male threaded terminal

30mBar gas-fired products are also supplied with threaded barb

Barb inlet: ¼” Left handed female threaded terminal 

Barb outlet: Threaded barb suitable for hose 8-10mm diameter

You may know a regulator as a kaasusäädin (FI), gasregelaar (NL) or regulátor plynu (SK). If you have ordered one of our 30mBar gas products, you will need to source a 30mBar regulator to connect these gas products to your gas tank and get cooking!

BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT, SK, SI, PL, MLT:

37mBar

✅Supplied and fully assembled with the Ooni product

To you a regulator might be known as a dujų reguliatorius (LT), regolatur tal-gass (MLT) or a gāzes regulators (LV). 

The regulator which is shipped with 37mBar Ooni gas products can be seen below:

Hose: 1.2m Hose                                      

Bottle Regulator: 37mBar Propane Regulator

Regulator inlet: 27mm diameter push on style Patio gas fitting



AT, CH, DE, SK: 

50mBar

✅Supplied and fully assembled with the Ooni product

The regulator which is shipped with all 50mBar Ooni gas products can be seen below:

Hose: 0.9m Hose                                      

Bottle Regulator: 50mBar Propane Regulator

Regulator inlet: 21.8 x 1/14” Left handed female thread

Further reading:

Regulators are classified into different groups depending on the millibar (mBar) of pressure which they will release when in use. We provide 28mBar, 30mBar, 37mBar and 50mBar regulators for our Ooni gas products.

As well as regulating to different mBar pressures, regulators can also be a different shape and size. In other words, not all 30mBar regulators are the same and neither are 28mBar, 27mBar or 50mBar.

Please note that our gas products themselves are also region specific and so changing the regulator will not make a product function in a region which it has not been designed for use in. For example, putting a US regulator on a UK Ooni Koda model will not make this model suitable for use in the US.

Listed above are the regulators which we ship and the countries which they are compatible for use in. If your country is seen for more than one of these millibars, please check in with your local hardware or appliance store in order to determine which gas tanks are available to you in your area.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.