How do I attach my regulator to my gas tank?

July 11 2024 3:00pm • Est. Read Time: 2 MIN

To attach your regulator to your gas tank, follow the steps below (the steps will differ depending on which region you live in).

How to attach a 28mBar regulator

If you live in 🇨🇦 or 🇺🇸 

Step 1: Check to make sure the gas valve on your propane tank is clean and free of debris. If there is any debris, wipe away with a dry cloth.

Step 2: Hand-tighten the black regulator nozzle onto the gas valve on your propane tank. 

Step 3: Open up the flow of gas by turning the gas valve on your propane tank.

How to attach a 37mBar regulator

If you live in 🇧🇪 🇨🇾 🇨🇿 🇫🇷 🇬🇧 🇬🇷 🇮🇪 🇮🇹 🇱🇻 🇱🇹 🇱🇺 🇲🇹 🇵🇹 🇸🇰🇸🇮 🇪🇸 or🇨🇭

Step 1: Check to make sure the gas valve on your propane tank is clean and free of debris. If there is any debris, wipe away with a dry cloth.

Step 2: Press and hold the black button on your regulator, and press the regulator into position onto the gas valve on your propane tank. Turn your regulator until it clicks into place, and then release the button.

Step 4: Gently pull your regulator upwards to make sure it’s in place.

Step 5: Open up the flow of gas by pulling the black switch on your regulator upwards.

How to attach a 50mBar regulator

If you live in 🇦🇹 🇩🇪 🇸🇰 or🇨🇭

Step 1: Check to make sure the gas valve on your propane tank is clean and free of debris. If there is any debris, wipe away with a dry cloth.

Step 2: Hand-tighten the gold regulator nozzle onto the gas valve on your propane tank.

Step 3: Open up the flow of gas by turning the gas valve on your propane tank.

Was this article helpful?