How do I connect my gas burner's regulator to my gas bottle? (France only)
March 18 2024 9:09amIf the regulator that was included with your Ooni gas burner doesn't fit onto your gas tank, you have two options.
Source a new gas tank: The 'Butagaz Cube' is a popular propane gas bottle that is compatible with the Ooni-supplied 37mBar regulator. You can find more information about it here.
Switch the regulator: If you don't want to source a new gas bottle, you can source a new regulator to connect up to your preferred fitting of propane gas bottle. If you do this, please ensure you use a 37mBar regulator to match your oven. We also recommend using propane gas.
If swapping the regulator, always carry out a gas leak test before firing up.
If using butane
Our products have been optimised for use with propane, but if you prefer to use butane, you'll need to source a 28-30mbar butane regulator that connects to your butane gas bottle. This will look similar to the image below.
To swap the over the regulators, remove the 37mbar Ooni-supplied regulator from the hose while keeping the hose connected to your gas burner. Secure the new butane regulator onto the hose. It's important to perform a gas leak test before firing up.
Please note that butane causes a sootier flame and it may take the oven longer to heat up.
The 'Butagaz Cube' can also come with butane which will require a different regulator (similar to the one pictured above). We recommend you consult a local gas expert to ensure you have the correct regulator.