How do I light my Ooni Koda 12 using the matchstick holder

August 8 2024 1:22pm


If you experience the Ooni Koda 12 not lighting, it's important to carefully follow the outlined steps in this article (I’m having trouble lighting my Ooni Koda 12) before proceeding with the following instructions.

Before following the steps below, please read the following safety advice:

  • Always stand clear of your oven when igniting - ensure nobody is within 1 metre (3ft) of the front of the oven.
  • Always wear protective gloves when handling the matchstick holder.
  • Always allow 5-minute intervals between lighting attempts. This is to allow time for any gas to disperse.
  • Make sure to read through the safety manual for your region: America and Canada, UK and Europe or Australia and New Zealand


Step 1 - Ensure the oven is off. Make sure that the oven is in the off position and that you've allowed 5 minutes for any gas to disperse. 

Step 2 - Position the lit match. Wearing protective gloves, and with a lit match on the end of the matchstick holder, position the match over the burners at the back of the oven:

Step 3 - Allow gas to flow. Push in the control dial and rotate counter-clockwise, the oven should light within a few seconds. Continue to hold in and turn the dial until you hear the click of the sparker:

Step 4 - Remove the matchstick holder. Once the oven is lit remove the matchstick holder, but continue to hold the dial for a total of 5 seconds before releasing:


Was this article helpful?