Visor removal and replacement

June 17 2024 12:13pm


⚠ BEFORE YOU BEGIN:

  • Make sure your oven is completely cool before removing the glass visor.

  • Wear protective gloves to avoid sharp edges.


Visor Removal

  • Make sure your oven is cool, then place your thumb above the screw to support the hinge
  • Use a screwdriver to rotate the screw counterclockwise, unlocking the hinge
  • Gently lower the hinge using your left thumb. 

  • Using both hands, carefully lift the left-hand side of the visor and pull forward to remove from the opposite bracket.


Visor Replacement

  • Using both hands, carefully guide the visor into the U-shaped bracket at the top right of the oven mouth 
  • Place the left-hand side of the visor into the recess on the left hinge thumb under the hinge and gently push upward until it lies flat against the oven body.
  • Hold the hinge in this position and use a screwdriver to rotate the screw clockwise, locking it back into place.
Was this article helpful?